Merchandise Description

Merchandise Description:

one. Flexspline is a hollow flanging regular cylinder composition.

2. There is a huge-diameter hollow shaft hole in the middle of the cam of the wave generator. The interior design of the reducer has a assistance bearing.

three. It has a fully sealed structure and is simple to set up. It is quite appropriate for the instances the place the wire requirements to be threaded from the centre of the reducer.
 

Positive aspects:
1. Large precision,substantial torque
two. Devoted technical staff can be on-the-go to provide style solutions
3. Manufacturing unit direct sales fine workmanship durable good quality assurance
4. Solution top quality problems have a one-year guarantee time, can be returned for replacement or repair

Organization profile:

 

HangZhou CZPT Engineering Co., Ltd. was recognized in 2014. Primarily based on extended-phrase amassed expertise in mechanical layout and production, numerous types of harmonic reducers have been produced in accordance to the various demands of buyers. The firm is in a phase of rapid development. , Tools and personnel are continuously expanding. Now we have a group of seasoned technological and managerial personnel, with sophisticated products, complete screening approaches, and product producing and layout capabilities. Merchandise style and production can be carried out in accordance to consumer wants, and a variety of substantial-precision transmission elements these kinds of as harmonic reducers and RV reducers have been fashioned the products have been offered in domestic and groble(These kinds of as United states,Germany ,Turkey,India) and have been utilised in industrial robots, machine tools, health-related products, laser processing, slicing, and dispensing , Brush producing, LED equipment producing, precision digital equipment and other industries have established a excellent track record.
In the future, Hongwing will adhere to the purpose of gathering skills, retaining near to the industry, and technological innovation, have forward the worth pursuit in the subject of harmonic drive&RV reducers, seek out the frequent development of the firm and the culture, and quietly develop itself into a well-identified brand name with independent intellectual residence legal rights. Good quality provider in the subject of precision transmission”.

Power factory:
 

Our plant has an total campus The quantity of workshops is close to 300 No matter whether it really is from the production of uncooked materials and the procurement of uncooked resources to the inspection of finished items, we’re performing it ourselves. There is a complete production technique

HST-III Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at start end The allowable highest of the typical load torque Maximum torque is permitted in an instantaneous Let the highest velocity to be entered Average input velocity is allowed Back again hole style existence
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 six.2 .six 20.seven 2.1 seven.nine .seven 40.three 4.1 7000 3000 ≤30 10000
eighty nine .nine 27 2.seven twelve.7 one.3 54.one five.five
one hundred 9 .9 32 3.three twelve.7 one.3 sixty two.one six.three
17 fifty eighteen.4 1.nine 39 four 29.nine three 80.5 8.two 6500 3000 ≤30 15000
80 twenty five.3 2.six 49.five five 31 three.2 100.one 10.two
a hundred 27.6 two.8 62 6.3 forty five 4.6 124.2 twelve.seven
20 50 28.eight two.nine sixty four.4 6.six 39 four 112.seven 11.five 5600 3000 ≤30 15000
eighty 39.1 4 85 eight.8 54 5.5 146.1 fourteen.9
a hundred 46 4.seven 94.three nine.six fifty six five.eight 169.one seventeen.2
one hundred twenty 46 four.7 a hundred ten.2 fifty six five.eight 169.one 17.2
160 forty six four.seven one hundred 10.2 56 5.8 169.1 seventeen.two
25 50 forty four.9 four.six 113 eleven.five sixty three six.five 213.nine 21.eight 4800 3000 ≤30 15000
80 72.5 7.four 158 16.one 100 ten.two 293.three 29.nine
one hundred seventy seven.1 7.9 181 eighteen.four 124 12.seven 326.six 33.3
one hundred twenty 77.one seven.nine 192 19.six 124 twelve.7 349.six 35.6
32 fifty 87.four eight.nine 248 25.3 124 12.seven 439 forty four.8 4000 3000 ≤30 15000
80 a hundred thirty five.7 thirteen.eight 350 35.six 192 19.six 653 sixty six.six
100 157.6 sixteen.one 383 39.one 248 twenty five.3 744 75.9
forty a hundred 308 37.two 660 67 432 44 1232 126.seven 4000 3000 ≤30 15000

HSG Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at start off end The allowable optimum of the common load torque Maximum torque is allowed in an instantaneous Permit the highest speed to be entered Regular input velocity is allowed Again hole design existence
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 fifty 7 .seven 23 2.three 9 .nine 46 four.seven 14000 8500 ≤20 15000
80 10 1 thirty 3.one fourteen one.4 sixty one 6.two
100 ten 1 36 three.seven 14 1.4 70 7.two
17 fifty 21 two.one 44 4.five 34 3.four ninety one 9 10000 7300 ≤20 20000
eighty 29 2.nine fifty six 5.7 35 three.6 113 twelve
one hundred 31 3.two 70 7.2 51 five.2 143 15
20 fifty 33 three.three seventy three 7.4 forty four four.5 127 13 10000 6500 ≤20 20000
eighty forty four four.five 96 nine.eight 61 six.2 a hundred sixty five 17
one hundred 52 five.three 107 ten.nine sixty four 6.5 191 20
one hundred twenty 52 5.three 113 eleven.5 sixty four six.five 191 twenty
a hundred and sixty fifty two five.three a hundred and twenty 12.two sixty four six.5 191 20
25 fifty 51 five.2 127 thirteen seventy two 7.three 242 twenty five 7500 5600 ≤20 20000
80 eighty two 8.4 178 eighteen 113 twelve 332 34
100 87 eight.nine 204 21 one hundred forty fourteen 369 38
one hundred twenty 87 eight.9 217 22 140 fourteen 395 forty
32 50 ninety nine ten 281 29 one hundred forty 14 497 51 7000 4800 ≤20 20000
80 153 sixteen 395 forty 217 22 738 seventy five
100 178 eighteen 433 forty four 281 29 841 86
40 one hundred 345 35 738 75 484 forty nine 1400 143 5600 4000 ≤20 20000

Exhibitions:

Software situation:

FQA:
Q: What ought to I offer when I select gearbox/pace reducer?
A: The very best way is to offer the motor drawing with parameter. Our engineer will check and advise the most appropriate gearbox model for your refer.
Or you can also supply below specification as well:
one) Type, product and torque.
two) Ratio or output velocity
three) Doing work situation and link method
4) Quality and put in machine title
5) Enter mode and enter speed
six) Motor manufacturer design or flange and motor shaft dimensions

 

US $523.8
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery, Hst-I
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000
US $523.8
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery, Hst-I
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

Benefits and Uses of Miter Gears

If you’ve ever looked into the differences between miter gears, you’re probably wondering how to choose between a Straight toothed and Hypoid one. Before you decide, however, make sure you know about backlash and what it means. Backlash is the difference between the addendum and dedendum, and it prevents jamming of the gears, protects the mating gear surfaces, and allows for thermal expansion during operation.
gear

Spiral bevel gears

Spiral bevel gears are designed to increase efficiency and reduce cost. The spiral shape creates a profile in which the teeth are cut with a slight curve along their length, making them an excellent choice for heavy-duty applications. Spiral bevel gears are also hypoid gears, with no offsets. Their smaller size means that they are more compact than other types of right-angle gears, and they are much quieter than other types of gear.
Spiral bevel gears feature helical teeth arranged in a 90-degree angle. The design features a slight curve to the teeth, which reduces backlash while increasing flexibility. Because they have no offsets, they won’t slip during operation. Spiral bevel gears also have less backlash, making them an excellent choice for high-speed applications. They are also carefully spaced to distribute lubricant over a larger area. They are also very accurate and have a locknut design that prevents them from moving out of alignment.
In addition to the geometric design of bevel gears, CZPT can produce 3D models of spiral bevel gears. This software has gained widespread attention from many companies around the world. In fact, CZPT, a major manufacturer of 5-axis milling machines, recently machined a prototype using a spiral bevel gear model. These results prove that spiral bevel gears can be used in a variety of applications, ranging from precision machining to industrial automation.
Spiral bevel gears are also commonly known as hypoid gears. Hypoid gears differ from spiral bevel gears in that their pitch surface is not at the center of the meshing gear. The benefit of this gear design is that it can handle large loads while maintaining its unique features. They also produce less heat than their bevel counterparts, which can affect the efficiency of nearby components.

Straight toothed miter gears

Miter gears are bevel gears that have a pitch angle of 90 degrees. Their gear ratio is 1:1. Miter gears come in straight and spiral tooth varieties and are available in both commercial and high precision grades. They are a versatile tool for any mechanical application. Below are some benefits and uses of miter gears. A simple explanation of the basic principle of this gear type is given. Read on for more details.
When selecting a miter gear, it is important to choose the right material. Hard faced, high carbon steel is appropriate for applications requiring high load, while nylon and injection molding resins are suitable for lower loads. If a particular gear becomes damaged, it’s advisable to replace the entire set, as they are closely linked in shape. The same goes for spiral-cut miter gears. These geared products should be replaced together for proper operation.
Straight bevel gears are the easiest to manufacture. The earliest method was using an indexing head on a planer. Modern manufacturing methods, such as the Revacycle and Coniflex systems, made the process more efficient. CZPT utilizes these newer manufacturing methods and patented them. However, the traditional straight bevel is still the most common and widely used type. It is the simplest to manufacture and is the cheapest type.
SDP/Si is a popular supplier of high-precision gears. The company produces custom miter gears, as well as standard bevel gears. They also offer black oxide and ground bore and tooth surfaces. These gears can be used for many industrial and mechanical applications. They are available in moderate quantities from stock and in partial sizes upon request. There are also different sizes available for specialized applications.
gear

Hypoid bevel gears

The advantages of using Hypoid bevel and helical gears are obvious. Their high speed, low noise, and long life make them ideal for use in motor vehicles. This type of gear is also becoming increasingly popular in the power transmission and motion control industries. Compared to standard bevel and helical gears, they have a higher capacity for torque and can handle high loads with less noise.
Geometrical dimensioning of bevel/hypoid bevel gears is essential to meet ANSI/AGMA/ISO standards. This article examines a few ways to dimension hypoid bevel and helical gears. First, it discusses the limitations of the common datum surface when dimensioning bevel/helical gear pairs. A straight line can’t be parallel to the flanks of both the gear and the pinion, which is necessary to determine “normal backlash.”
Second, hypoid and helical gears have the same angular pitch, which makes the manufacturing process easier. Hypoid bevel gears are usually made of two gears with equal angular pitches. Then, they are assembled to match one another. This reduces noise and vibration, and increases power density. It is recommended to follow the standard and avoid using gears that have mismatched angular pitches.
Third, hypoid and helical gears differ in the shape of the teeth. They are different from standard gears because the teeth are more elongated. They are similar in appearance to spiral bevel gears and worm gears, but differ in geometry. While helical gears are symmetrical, hypoid bevel gears are non-conical. As a result, they can produce higher gear ratios and torque.

Crown bevel gears

The geometrical design of bevel gears is extremely complex. The relative contact position and flank form deviations affect both the paired gear geometry and the tooth bearing. In addition, paired gears are also subject to process-linked deviations that affect the tooth bearing and backlash. These characteristics require the use of narrow tolerance fields to avoid quality issues and production costs. The relative position of a miter gear depends on the operating parameters, such as the load and speed.
When selecting a crown bevel gear for a miter-gear system, it is important to choose one with the right tooth shape. The teeth of a crown-bevel gear can differ greatly in shape. The radial pitch and diametral pitch cone angles are the most common. The tooth cone angle, or “zerol” angle, is the other important parameter. Crown bevel gears have a wide range of tooth pitches, from flat to spiral.
Crown bevel gears for miter gear are made of high-quality materials. In addition to metal, they can be made of plastic or pre-hardened alloys. The latter are preferred as the material is less expensive and more flexible than steel. Furthermore, crown bevel gears for miter gears are extremely durable, and can withstand extreme conditions. They are often used to replace existing gears that are damaged or worn.
When selecting a crown bevel gear for a miter gear, it is important to know how they relate to each other. This is because the crown bevel gears have a 1:1 speed ratio with a pinion. The same is true for miter gears. When comparing crown bevel gears for miter gears, be sure to understand the radii of the pinion and the ring on the pinion.
gear

Shaft angle requirements for miter gears

Miter gears are used to transmit motion between intersecting shafts at a right angle. Their tooth profile is shaped like the mitre hat worn by a Catholic bishop. Their pitch and number of teeth are also identical. Shaft angle requirements vary depending on the type of application. If the application is for power transmission, miter gears are often used in a differential arrangement. If you’re installing miter gears for power transmission, you should know the mounting angle requirements.
Shaft angle requirements for miter gears vary by design. The most common arrangement is perpendicular, but the axes can be angled to almost any angle. Miter gears are also known for their high precision and high strength. Their helix angles are less than ten degrees. Because the shaft angle requirements for miter gears vary, you should know which type of shaft angle you require before ordering.
To determine the right pitch cone angle, first determine the shaft of the gear you’re designing. This angle is called the pitch cone angle. The angle should be at least 90 degrees for the gear and the pinion. The shaft bearings must also be capable of bearing significant forces. Miter gears must be supported by bearings that can withstand significant forces. Shaft angle requirements for miter gears vary from application to application.
For industrial use, miter gears are usually made of plain carbon steel or alloy steel. Some materials are more durable than others and can withstand higher speeds. For commercial use, noise limitations may be important. The gears may be exposed to harsh environments or heavy machine loads. Some types of gears function with teeth missing. But be sure to know the shaft angle requirements for miter gears before you order one.

China Low Backlash Mini Harmonic Drive Gear Head for Robotic Arm     with high qualityChina Low Backlash Mini Harmonic Drive Gear Head for Robotic Arm     with high quality
editor by czh 2022-12-22